How to Hang Curtains Like a Professional | Tips for a Polished Interior Look?

Adding curtains or drapes to a room not only elevates the interior styling but serves many other functional purposes as well. Window curtains can look perfect and give an instant interior beautification depending on the way you hang them. Well-hung curtains not just look flawless but are also purposeful because they effectively control and/or block light, provide privacy, and contribute to the overall look of a room.

By hanging your curtains correctly, you can enhance the room’s look and secure your curtain investment for years to come. Fixit Design has come up with an expert and comprehensive guide to help you flaunt drapes perfectly on windows.

Hang Window Curtains Like A Professional In 8 Easy Steps

Hanging curtains is not a simple task, particularly when you are an amateur. But you have to consider the window dimensions, room layout, and purpose to buy perfect curtains. Even before you purchase window coverings from the best curtains shop Dubai, you should take accurate measurements.

1. Start With Measurements

Measurements are everything when it comes to hanging window curtains. If you have already bought curtains and hardware, this step can be skipped. Depending on the width and length of your windows:

• Determine Curtain Rod’s Length & Height

The rod length should be extended at least 6 inches past the window frame from both sides. The rod must always be wider than the intended width of the windows. The height of the curtain rod must be 3-6 inches above the window trim.

• Measure Your Curtains Length & Width

Based on the window dimensions and rod length and width, the curtains’ length and width can be calculated. For width, each curtain panel must be half of the length of the rod. For the length, measure from the top of the rod down to the floor or window sill, depending on the look you want

2. Ready Your Materials

Tools and supplies that you’ll need are here:

• Pencil For Marking
• Screwdriver
• Drill Machine
• Tape Measure
• A Stud Finder
• Rod Brackets
• Wall anchors Or Screws
• A level
• A screwdriver
• Curtain rings & pins (optional)
• Safety goggles and mask
• A step ladder

3. Mark Bracket Placement & Drill Holes

Use a measuring tape and a pencil to mark the position of brackets. While considering the rod’s width and height recommendations above, make dots over where the bracket screws will go. To ensure that the markings are leveled from both sides, you can use the level. After marking placement for brackets, wear mask and safety goggles to use a drill machine. Make pilot holes with a drill to fit in screws perfectly.

4. Install Wall Anchors

Wall anchors are used when there’s not a stud. These wall anchors can hold the weight of your curtain rod and provide proper support. You can lightly tap the wall anchors into the wall using a hammer or a rubber mallet. Ensure that anchors reach the end of the drilled hole and are secured properly.

5. Screw In Rod Brackets

Using a screwdriver, fasten brackets to the wall. To check that the brackets are level, you can use a level or mount the curtain rod without curtains. A third bracket can also be installed in the middle of the rod if the width is too broad. Tighten and secure the screws to prevent your curtain rods from shifting.

6. Hang The Curtains

Based on the type of curtain fabrics you have, there are various methods and styles to hang them. If your curtains have a rod pocket, simply slide the rod through it. For curtains with grommets, thread your rod through the grommets and hang them.

Another option is to use curtain rings with clips, which attach the curtains to the rod. For a balanced and symmetrical appearance, be sure that the curtains or drapes are evenly distributed on the rod. Use a step ladder to hang them over the windows. For unfinished curtain pole ends, you can attach the finials which is the decorative trimming.

7. Create Uniform Folds

To achieve a professional look, create uniform folds in the curtains. Lightweight curtains can be gently pushed to create natural folds. For heavier curtains, manually pleat or gather the fabric to create more defined folds. Experiment with different folding techniques until you achieve the desired effect.

8. Finishing Touches

To complete the look, consider using the curtain accessories such as holdbacks or tiebacks. These functional and decorative elements keep the curtains open and frame the window beautifully. Choose holdbacks that complement the curtain rods and overall room decor. Here you are done with hanging curtains with a professional and polished look.

Tips For Hanging Curtains For A Polished Look

When hanging curtains yourself, there are many things that you need to consider. We have some legit tips for hanging curtains professionally.

• Check that the curtains you are buying are wide enough for your windows to control light.
• Short curtains don’t look good in formal rooms. Longer curtains look perfect in large rooms.
• Avoid excessive puddling as the bottom edges of curtains can get damaged.
• If drapes are too heavy, like blackout curtains, invest in good-quality hardware that can support them.
• Choose the curtain rod that suits the curtain colors well.
• Pick the curtain’s header style that uplifts the window decor.

To Sum Up!

Fixit Design is one of the best interior design companies in Dubai and has got you professional tips and tricks for hanging curtains and giving your homes a polished look. With the above-mentioned hacks, you can easily achieve the best results from your window treatments. All you need to do is take window and curtain measurements precisely, grab the drill, and make holes to install brackets. After securing the brackets, hang your curtains over the rod and attach the finials at the ends.